LM 5.08/02/90 3.5SN OR BX 1716080000

Printed circuit board terminals, 5.08 mm, Number of poles: 2, 90°, Solder pin length (l): 3.5 mm, tinned, orange, Clamping yoke connection, Clamping range, max. : 2.5 mm², Box

Ürün Kodu: 1716080000

Minimum Sipariş Adedi (Ambalaj): 500 AD

• Cross-section for conductor connection: fine-wired
• Tip: 0,5 mm²
• wire end ferrule: 0409500000
• Stripping length: 6 mm
• Recommended wire-end ferrule: fine-wired
• Stripping length: 0,75 mm²
• Recommended wire-end ferrule: 0409600000
• Cross-section for conductor connection: 6 mm
• Tip: 0282700000
• wire end ferrule: 1 mm²
• Stripping length: 8 mm
• Recommended wire-end ferrule: 6 mm
• Stripping length: 0372600000
• Recommended wire-end ferrule: 0,25 mm²
• Cross-section for conductor connection: 8 mm
• Tip: 9025740000
• wire end ferrule: 9018910000
• Stripping length: fine-wired
• Recommended wire-end ferrule: 8 mm
• Stripping length: 9025750000
• Recommended wire-end ferrule: mark of origin, type identification, pitch, type of material, approval marking UL, approval marking CSA, durability
• Cross-section for conductor connection: available
• Tip: DIN EN 60999-1 section 7 and 9.1 / 12.00, DIN EN 60947-1 section 8.2.4.5.1 / 12.02
• wire end ferrule: stranded 0.2 mm²
• Stripping length: stranded 1.5 mm²
• Recommended wire-end ferrule: AWG 24/1
• Stripping length: AWG 24/19
• Recommended wire-end ferrule: AWG 14/19
• Cross-section for conductor connection: passed
• Tip: DIN EN 60999-1 section 9.4 / 12.00
• wire end ferrule: stranded 0.25 mm²
• Stripping length: AWG 24/1
• Recommended wire-end ferrule: passed
• Standard: 0.3 kg
• Test: solid 0.5 mm²
• Evaluation: passed
• Standard: 0.4 kg
• Conductor type: stranded 1.5 mm²
• Tip of conductor and conductor cross-section: passed
• Tip of conductor and conductor cross-section: 0.7 kg
• Tip of conductor and conductor cross-section: solid 2.5 mm²
• Tip of conductor and conductor cross-section: AWG 14/1
• Tip of conductor and conductor cross-section: AWG 14/19
• Tip of conductor and conductor cross-section: passed
• Tip of conductor and conductor cross-section: DIN EN 60999-1 section 9.5 / 12.00
• Tip of conductor and conductor cross-section: ≥10 N
• Evaluation: stranded 0.25 mm²
• Standard: AWG 24/1
• Requirement: AWG 24/19
• Conductor type: passed
• Tip of conductor and conductor cross-section: ≥20 N
• Tip of conductor and conductor cross-section: H05V-U0.5
• Tip of conductor and conductor cross-section: passed
• Evaluation: ≥40 N
• Requirement: H07V-K1.5
• Conductor type: passed
• Tip of conductor and conductor cross-section: ≥50 N
• Evaluation: H07V-U2.5
• Requirement: AWG 14/1
• Conductor type: AWG 14/19
• Tip of conductor and conductor cross-section: passed